Portable Generators | Standby Generators | Air Compressors | UPS Uninterruptible Power Sources | Automotive Parts
H-100 Control Panel
DESCRIPTION• Digital controls for all safety shutdowns • Isochronous governor control built • Sealed Digital Circuit Board • 2 Amp static battery charger • Mates with HTS transfer switch STANDARD FEATURESThe H-100 Control Panel is a digital microprocessor
electronic controller that integrates all engine and transfer switch
functions into a single control system. Two 4 line x 20 displays 3 phase sensing voltage regulator Remote ports - RS232 - RS485 - Canbus Water proof connections All engine sensors are 4-20 ma for minimal interference Built in PLC. In addition, the generator set parameters can be manipulated and monitored without standing in front of the control panel with GenLink® software. The Generac H-100 control also monitors and controls transfer switch functions when used with the HTS Transfer Switch. Monitors utility voltage Monitors generator voltage Timer for line interrupt delay Timer for engine warmup Timer for minimum engine run time Timer for return to utility position Timer for engine cooldown Built in exerciser timer (7 day) Additional 2 wire start controls
|
|
*Ground wire is routed between
generator and transfer switch, but is terminated only in H-100 Controller on
generator.
See interconnection diagram on spec sheet and guidelines within owner's manuals.
H-100 Control Panel for Guardian Elite Generators | Home
Sitemap | Website Design by Search Engine First Place